| • The exterior of the Sentry RiverPool® is constructed of 12 panels that bolt together on site. The Sentry RiverPool® panels are constructed of heavy 14-gauge powder coated steel. Once bolted together the Sentry RiverPool® is free-standing, thus allowing for easy installation in almost any application. |
| • The interior of the Sentry RiverPool® is lined with a rugged PVC membrane liner. The liner is smooth and soft to the touch. The PVC liner bottom rests on a 1"thick insulation board thus providing a more comfortable surface for you to stand and also insulating the floor of the Sentry RiverPool®. |
| • The Sentry RiverPool® liner is 20-mil's thick, 50% thicker than the liners used in a standard swimming pool. The liner is durable enough to withstand normal jabs and pokes, but sharp objects like broken glass can puncture it. Should this occur, the liner can be patched with an inexpensive patch kit without draining the Sentry RiverPool® The liner is warranted for 15 years (not 10 as in some other brands) against structural defects. |
| • The water propulsion system and underwater perimeter return channel benches installed inside the Sentry RiverPool® frame are constructed of the highest quality 18 gauge 316 L Stainless Steel. |
| • Site Requirements: Solid, level floor, capable of supporting 200 lbs. per sq. ft. Can be installed above-ground, partially in-ground, or completely in-ground. |
| • Power Requirements: |
| 220 volts, 30 amps (GFCI) 5 HP or 7-1/2 HP Motor |
| 220 volt, 30 amps (GFCI) 5.5. kw heater |
| 220 volt, 15 amps (GFCI) 3/4 re-circulating motor |
| 220 Volt, 20 amps (GFCI) Jets Pump |
| 110 volt , 5 amps 2 light fixtures 75 watts each |
| 110 volt, 10 amps (GFCI) automatic pool cover 1/2 HP motor |
|
